Faxback NET SatisFAXtion 8.7 (Including R3) - Manual Manuel d'utilisateur télécharger pdf (Page 27)

2 – Server Administration

NET SatisFAXtion 8.7 Manual

This will set the registry key [HKLM\Software\FaxBack\IP_FAX]

local_ip_address which indicates the IP address to use for SIP communica-

tion.

2.2.3 Class 1 / Class 2

Most internal and external serial modems use the Class 1 or Class 2 command

set.

2.2.3.1 Configuring NET SatisFAXtion to use a Class 1 or Class 2 device

NET SatisFAXtion can use most Class 1 or Class 2 fax modems to send and re-

ceive faxes.

Class 1 or Class 2 devices are initially configured in

Re-Detect Fax Devices

. En-

sure that the modem’s drivers are already installed and Windows has detected

them. Configured modems will be listed in Window’s

Phone and Modem Op-

tions

control panel.

Modems cannot be shared between applications, so ensure that no other tele-

phony application is installed on the fax server. If there are other applications

using the modems, NET SatisFAXtion will report that it cannot access the de-

vice (“Windows serial device name unknown”). If you have no other telephony

applications installed, check the Remote Access Connection Manager service:

disable it, reboot and try again (Windows will not allow you to manually stop

this service).

2.2.4 Dialogic Brooktrout TR114

Dialogic Brooktrout TR114 cards are natively supported by NET SatisFAXtion,

and no additional driver software is required.

These fax cards are configured in

Re-Detect Fax Devices

2.2.5 Dialogic Brooktrout TR1034

Dialogic Brooktrout TR1034 cards are supported by NET SatisFAXtion using

the bos_man_setup utility. No additional driver software is required.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 237 238

Pas de commentaire

Faxback NET SatisFAXtion 8.7 (Including R3) - Manual Manuel d'utilisateur Page 27