Faxback NET SatisFAXtion 8.7 (Including R3) - Manual Manuel d'utilisateur Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 238
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
2 – Server Administration
NET SatisFAXtion 8.7 Manual
26
Please note that the media gateway must support SIP and T.38 protocols, and
must initiate T.38 on detection of fax tone for outbound faxes. (For inbound
faxes, NET SatisFAXtion will initiate T.38.)
2.2.2.2.4 SIP Trunk Provider
If you are using a SIP provider, click on the
Show Advanced Settings
link to en-
able manual configuration. For providers that do not require
authentication
or
registration
(i.e. they use IP authentication), simply enter the IP address speci-
fied by the provider.
If you require
authentication
and
registration,
choose the radio option t
hrough
this SIP proxy/server
. Enter the remote IP address specified by the provider
and fill in the required
user name
and
password
. Usually
AoR
will be the same
as the
user name.
It will be used in the SIP REGISTER messages as the part of
the
From
URI before the @.
Please note that the provider must support SIP and T.38 protocols, and must
initiate T.38 on detection of fax tone for outbound faxes. (For inbound faxes,
NET SatisFAXtion will initiate T.38.)
2.2.2.3 Using Multiple VoIP Gateways
NET SatisFAXtion will answer all calls sent to it, so there is no additional con-
figuration necessary to
receive
calls from multiple gateways.
To use multiple gateways to
send
calls, some additional registry configuration is
required.
2.2.2.4 Fax Server with Multiple Network Interface Cards
A fax server with multiple network interface cards (NICs) presents a special
problem. All SIP communication will use the IP address of the first adapter in
the binding order. To check the binding order, open the
Control Panel Net -
work Connections
folder. Click the
Advanced Advanced Settings
menu. All
the network connections on the server will be listed here, move the connection
that that should be used to the top.
Alternately, you can manually override the IP address used by going to the
Change Server Settings
utility,
Start Programs NET SatisFAXtion
Change Server Settings
. Click the
Fax Hardware
button, select a port, click
Ad-
vanced
, then click
More Settings
.
Make sure the IP address you enter is valid for this server. If using a domain
name, make sure the name resolves from the media gateway
and
the IP it re-
solves to is valid for this server.
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 237 238

Commentaires sur ces manuels

Pas de commentaire