Faxback NET SatisFAXtion 8.6 - Manual Manuel d'utilisateur télécharger pdf (Page 20)

2 – Server Administration NET SatisFAXtion 8.6 Manual 20

Click the Change button next to CSID. Enter your CSID and click OK when

finished.

2.2.1.3 Fax Speed

Fax speed is controlled by three things: the maximum speed the sender

supports, the maximum speed the receiver supports, and what speed the

phone lines and telephone network can support. The lowest of these three

speeds will be used. For example, if the sender supports speeds up to 14,400,

the receiver supports speeds up to 12,000, but the line can only support 9600,

the fax will be sent at 9600.

There are two common reasons to change the allowed fax speed:

Prevent Slow Faxes: At the lower speeds faxes can take an unusually long

time to send or receive. It is useful to increase the minimum allowed speed to

9600 to disallow faxes from using very slow speeds. If the line quality is poor

enough that the fax cannot be sent or received at 9600, it will fail instead of

using lower speeds.

Troubleshooting Poor Line Quality: If line quality is poor and many faxes

are failing with communication errors, success rate may be slightly improved by

decreasing the maximum allowed fax speed to 9600.

You can configure the speeds allowed for sending and receiving in the Change

Server Settings utility, Start ► Programs ► NET SatisFAXtion ► Change

Illustration 2.2.1.2#1: Change Server Settings – Fax Hardware Settings –

General

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 239 240

Pas de commentaire

Faxback NET SatisFAXtion 8.6 - Manual Manuel d'utilisateur Page 20